Home > Floppy Disk > Floppy Disk Fail 40 Error

Floppy Disk Fail 40 Error

Contents

The friend who helped me build my comp ran a lot more on the LS600 and didn't have problems with it. If you're new to the TechRepublic Forums, please read our TechRepublic Forums FAQ. Junior Bracho 77,405 views 2:18 Как убрать Floppy disk(s) fail (40) - Duration: 3:07. BlairTechnologyGroup 42,084 views 3:50 Floppy Disk(s) Fail (40) resuelto - Duration: 2:18. navigate here

Pin one is normally next to the drive motor on the Floppy Drive. Orient yourself with the back of the floppy drive inside the system. Loading... Standart CMOS Features, нажимаем Enter.3.

Floppy Disk Fail 40 Press F1

If the floppy cable is poorly seated, this error will often occur. useit2ru 1,157,947 views 5:03 Error: FLOPPY DISK(s) FAIL (40) En español solucionado - Duration: 1:05. Show more Language: English Content location: United States Restricted Mode: Off History Help Loading...

Follow the ribbon cable down to where it connects to the system board. the machine maybe searching the floppy for a bootable media. I did try putting the original back in as you suggest but no luck there either. Floppy Disk Fail 40 Windows Xp TechRepublic Search GO CXO Cloud Big Data Security Innovation More Software Data Centers Networking Startups Tech & Work All Topics Sections: Photos Videos All Writers Newsletters Forums Resource Library Tech Pro

If the floppy drive is identified incorrectly in CMOS, you will probably be unable to boot to or format a floppy diskette.Reboot and when you see the first boot screen called Floppy Disk(s) Fail (40) Windows 7 Check your CMOS settingsIf the problem is still there and it does not recognize the floppy, then it could be configured wrong in your CMOS (Setup). I have tried four different floppy drives and two different cables but still get the same result.

Thank you 0 #8 Zach Kemppel Posted 15 April 2010 - 07:05 PM Zach Kemppel New Member Member 1 posts I had this error, and this is how i fixed it.

The supervisor password causes the floppy drive to display error messages identical to those usually associated with a defective floppy drive or cable. Floppy Disk Fail 40 Cmos Checksum Error To handle this problem try the following: Check in the device manager that there is no yellow exclamation point near the floppy drive, if so reinstall the driver. This feature is not available right now. To handle this problem try the following: Check in the device manager that there is no yellow exclamation point near the floppy drive, if so reinstall the driver.

Floppy Disk(s) Fail (40) Windows 7

Quote: Standard BIOS Features -> Removable Device Priority -> 1. Win XP SP2 (I think) Intel Quad-Core 2.4ghz [OCed to 3.2ghz) RAM 4gb [2.5gb detected] HDD- Western Digital 160GB and not sure which company could be Maxtor 500GB SATA 8800GT 512mb Floppy Disk Fail 40 Press F1 Can I repair it?) 0 #15 rshaffer61 Posted 13 March 2011 - 04:05 PM rshaffer61 Moderator Moderator 34,114 posts Direct to: MolsyPlease start your own topic Although your issue may seem Floppy Disk Fail 40 Windows 10 Bot Seq & Floppy Setup, переходим Press Enter6.

This will help us to assist you more efficiently.Thank you for your cooperation. 0 Page 1 of 2 1 2 Next Back to Windows XP, 2000, 2003, NT · Next Unread check over here Loading... Posting system specs 01-24-2009, 03:04 PM #9 VincentDantes Registered Member Join Date: Jan 2009 Posts: 20 OS: Windows XP Service Pack 2 (I think) Quote: Originally Posted by Setup Floppy Driver установить значение Desable. Нажимаем F10 и на кнопку Y, и Enter.Теперь компьютер включается свободно, и не стоит нажимать F1 Category Music License Standard YouTube License Show more Show Floppy Disk Error 40

In CMOS use the arrow key to highlight Standard CMOS Setup and press [ENTER]. JCarterDammit 183,764 views 3:48 Disk boot failure, insert sistem disk and press enter (solucion final) - Duration: 4:53. Somehow the anti-virus scan mixed with downloading and a video game crash messed things up. his comment is here Error 31 is what I get in device manager when it actually sees the drive.

Add to Want to watch this again later? Floppy Disk Fail 80 Bad floppy cable If the floppy disk drive appears to be setup properly and the light is not always on, the floppy drive cable may be bad. What's the brand, model and wattage of your power supply ?

Power up the system, and try to boot to a floppy diskette and format a floppy diskette as mentioned on the previously.

Note: If you have a Pentium or PCI system, check the security section of the CMOS and remove the supervisor password if one has been set. No it is not a Compaq but thanks for the information as I work on a lot of Compaq's and HP's. I had several used floppy drives that I tried it with and one of them was new. Audio Cable Not Connected Xps 630i Quote: Drive A ...its currently set to '1.44M, 3.5 in' A: is indeed the floppy drive, if you don't have any you need to set it to none.

Thanks for the info from Microsoft, I tried finding something on this problem the other day and got lost in their archives and gave up. Working... In modern computer systems, the BIOS chip's contents can be rewritten allowing BIOS software to be upgraded.A BIOS will also have a user interface (or UI for short). weblink doctorBob Applications 2,977 views 3:21 Disk boot failure-pt resolvendo - Duration: 6:34.

We recommend getting a new cable from a computer hardware store and purchase a new cable. I havent got floppy, and i had disable flopy in/on?? i disable integrated LAN and no error halt 0 #12 bigbearvengeance Posted 06 March 2011 - 07:40 PM bigbearvengeance New Member Member 1 posts Back to the floppy disk (s) fail