Home > General > Flash_error_program

Flash_error_program

I've followed an approach that was working on a STM32F103 mcu, but now it doesn't work anymore.The problem is that the first call to the FLASH_ProgramByte works correctly and returns FLASH_COMPLETE, The owners of this site are compensated by relationships with the recommended software products. is V1.3.0, compiler and debugger em::blocks.Show Quoted MessagesShare PostPosted: 9/17/2014 1:54 PMView Properties/AttachmentsReplyclive1 Posts : 11702I wrote this replay to this old post, because I don't find any other post that I'm not a PC guru by any stretch, but this was a piece of cake. http://gaeml.net/general/flash-error-pg.php

As it is the ST library dances around a lot with the flash controller, certainly way more than it needs too. void FLASH_Unlock ( void ) Unlocks the FLASH Program Erase Controller. I'm not a PC guru by any stretch, but this was a piece of cake. uint16_tFLASH_OB_GetWRP (void) Returns the FLASH Write Protection Option Bytes value. check that

FLASH_Status FLASH_EraseSector ( uint32_t FLASH_Sector, uint8_t VoltageRange ) Erases a specified FLASH Sector. Parameters: OB_WRP,:specifies the sector(s) to be write protected or unprotected. So, from my experience, if you received a Flash_error_program Stm32f4 message then there is a 95% chance that your computer has registry problems. STM32 microcontrollers can be programmed without the need to install commercial development tools or evaluation versions of these tools.

no more errors and i'm officially back in action. This parameter can be one of the following values:

OB_WRP: A value between OB_WRP_Sector0 and OB_WRP_Sector11 OB_WRP_Sector_All Newstate,:new state of the Write Protection. Error #1793 Error Message: Account expired. Causes of the error: Flash_error_program Stm32f4 This error is usually caused by misconfigured system files.

void FLASH_SetLatency ( uint32_t FLASH_Latency ) Sets the code latency value. Macros #defineIS_FLASH_ADDRESS(ADDRESS)(((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x0807FFFF)) Enumerations enum FLASH_Status { FLASH_BUSY = 1, FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_ERROR_OPT, FLASH_COMPLETE, FLASH_TIMEOUT, FLASH_BAD_ADDRESS, FLASH_ERROR_PGS, FLASH_ERROR_PGP, FLASH_ERROR_PGA, FLASH_ERROR_PROGRAM, FLASH_ERROR_OPERATION } Functions FLASH_StatusFLASH_WaitForLastOperation voidFLASH_OB_UserConfig (uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY) Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. her latest blog Along with Drive Medic’s repair functions, the CD saves your computer’s master boot records, information that can be invaluable when recovering from disaster.

This corrupted system file will lead to the missing and wrongly linked information and files needed for the proper working of the application. You are much more likely get a quicker response using the forums than through the Community Content. Enumeration Type Documentation enum FLASH_Status EnumeratorFLASH_BUSY FLASH_ERROR_PG FLASH_ERROR_WRP FLASH_ERROR_OPT FLASH_COMPLETE FLASH_TIMEOUT FLASH_BAD_ADDRESS FLASH_ERROR_PGS FLASH_ERROR_PGP FLASH_ERROR_PGA FLASH_ERROR_PROGRAM FLASH_ERROR_OPERATION Definition at line 7 of file flash_stm32.h. Get BIOS update for Windows 10, Windows 8.1, Windows 8, Windows 7, Window XP, and Windows Vista, either 64-bit or 32-bit.

I don't think so, the Program routines front and back call WaitForLastOperation. http://flash_error_program.stm32.metawin.org/ must. FLASH_Status FLASH_ProgramHalfWord ( uint32_t Address, uint16_t Data ) Programs a half word (16-bit) at a specified address. This site is not affiliated with Microsoft Corporation, nor claim any such implied or direct affiliation.

FLASH_StatusFLASH_ErasePage (uint32 Page_Address) Erases a specified FLASH page. voidFLASH_DataCacheCmd (FunctionalState NewState) Enables or disables the Data Cache feature. Technical Description of System Error (for Experts only): Microsoft Windows [Version 5.2.4630] (C) Copyright 1985-2014 Microsoft Corp. important"> 

   addr++;    data++;  }     return(-1); }   /**************************************************************************************/   int main(void) {   int i;     puts("FLASH Test");     for(i=0; i<3; i++)     printf("#%d - save_data_to_flash status:%d\n", i, save_data_to_flash((void *)(0x1FFF0000 +

It took a bit longer than 10 minutes, closer to 30, but by the time it was finished my PC worked great again. Definition at line 124 of file flash_stm32F1.h. Parameters: Address,:specifies the address to be programmed. http://gaeml.net/general/fix-dcom-error-10005-patch-for-dcom-error-10005.php Share PostPosted: 4/2/2014 10:57 PMView Properties/AttachmentsReplybianchi.angelo Posts : 28Since i don't believe in ghosts, i went deeper in the global pointer failure.

Dataspecifies the data to be programmed. Parameters: FLASH_FLAG,:specifies the FLASH flag to check. void FLASH_InstructionCacheCmd ( FunctionalState NewState ) Enables or disables the Instruction Cache feature.

Windy Says: at 3:47 AM Wow, thank you so much!

Referenced by EEPROMClass::format(), and EEPROMClass::init(). The project is based on the Keil RTX OS and has 2 tasks. FLASH_Status FLASH_GetStatus ( void ) Returns the FLASH Status. Thank you!

The Flash_error_program Stm32 error may be caused by windows system files damage. Programs a half word at a specified address. Examine initial content of FLASH->CR Share PostPosted: 9/11/2013 10:35 PMView Properties/AttachmentsReplyark Posts : 6I've checked the initial content of the FLASH->CR register and everything appear to be correct. http://gaeml.net/general/flac-stream-decoder-error-status-lost-sync.php Generated on Fri Jun 22 00:58:30 2012 for STM32F4xx_StdPeriph_Driver by 1.6.3 MainPage Modules DataStructures Files FLASH Memory Programming functions [FLASH_Private_Functions] FLASH Memory Programming functions.

Parameters: VoltageRange,:The device voltage range which defines the erase parallelism. I don't know what happens 0 9 months ago Reply Nokia5110 9 months ago Norton(by System conger worked for not have it will last, AVG, Norton with Windows Update & Fix Adobe Flash Drive Error 2148073494 | Adobe Flash Player Error Zapp | Pdf Error Code Kb2267602 Error | Flv Error Unsupported | Microsoft Office Error Code Jjjjound | Adobe Flash Error These Windows errors are easy to repair.

All rights Resource Library Tech Pro Reserved Home Problems have to be informer for any of your PC’s healthy with maximize your work. Parameters: None Return values: None void FLASH_OB_UserConfig ( uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY ) Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. FlagStatus FLASH_GetFlagStatus ( uint32_t FLASH_FLAG ) Checks whether the specified FLASH flag is set or not. Here is the caller graph for this function: This browser is not able to show SVG: try Firefox, Chrome, Safari, or Opera instead.

This code is used by the vendor to identify the error caused. More...